The Mighty Max 3 stage automatic smart wheelchair battery charger comes with the round 3 pin XLR connector. The Mighty Max Charger provides an enhanced charging method that will not damage your batteries when left connected. Mighty Max 24V 2A charger also provides a short circuit protection, enabling the product to charge safely in most environments. Most common use with the following wheelchairs: Pride Mobility, Hoveround, Freedom, DDC, Shoprider, E-Scooter Electra, Frank Mobility, Merits Health Products, Theradyne and many more.
Features;
Mighty Max 24 Volt 2 Amp charger with 3 pin XLR connector
3 stage charging method ensuring full charge, avoiding over-charging
Float charge to ensure the batteries life
Temperature / Short Circuit protection
Dual color LED – showing operation of charging progress
3 Stage Advanced Charging;
Phase 1: Constant charge
Phase 2: Constant voltage
Phase 3: Float Charging
Specifications;
AC Input: 110-265Vac, 50-60Hz,
DC Output: 29.2V (28.8 – 29.6V);
Operating Temperature: -10C – 40C
Dimensions: 4.92 x 1.89 x 1.26
LED Indicator;
Green On: Power on, No Battery
Red On: Charging
Green On: Charging Finished, Trickle On
Green Flash: Battery Reverse Protection
KL –
I used this instead of the $300 direct replacement unit from Bruno Stair Lift. I had to check polarity with a DVM and change connector. Works great.
K McDavid –
I used this instead of the $300 direct replacement unit from Bruno Stair Lift. I had to check polarity with a DVM and change connector. Works great.
Dana J –
Very easy installation,works excellent
Dana J –
Very easy installation,works excellent
Mrtz –
Just installed and working fine last 24 hrs. Replaced the original charger for the Bruno Elite SRE 2010 chair lift that stopped working. Used with 2 new Expert Power 12v 7ah batteries. Measured voltage output to the batteries is 29.4v when charging with green light (I think stage 2) and 27.4v when fully charged with red light (I think stage 3 float). Battery has not been used as much to see if the stage 1 kicks in as the description says. So far so good after 1 day of use. The original OEM charger price was more than 10 times the price of this one. Seems to work equally well.
Mrtz –
Just installed and working fine last 24 hrs. Replaced the original charger for the Bruno Elite SRE 2010 chair lift that stopped working. Used with 2 new Expert Power 12v 7ah batteries. Measured voltage output to the batteries is 29.4v when charging with green light (I think stage 2) and 27.4v when fully charged with red light (I think stage 3 float). Battery has not been used as much to see if the stage 1 kicks in as the description says. So far so good after 1 day of use. The original OEM charger price was more than 10 times the price of this one. Seems to work equally well.
David –
worked great first time , fast shipping , great price
David –
worked great first time , fast shipping , great price
glen –
suits my needs perfectly
Crystal B. –
Works great and reasonably priced!
Kerry –
Chargers work very well.
LL.a –
This is what you want! Great charger and very good service support team at Mighty Max.